UTG PRO® POI® Ring Set

• Proudly Designed and Manufactured in the USA
  
• The medium profile POI® (Precision Optics Interface) rings have a central height of 32mm to fit optics with a 34mm tube and an outer lens up to 63mm.
  
• The high-profile POI® (Precision Optics Interface) rings have a 37mm center height to fit optics with a 34mm tube and up to a 73mm outer lens.
• Innovative POI® (Precision Optics Interface) addresses 3 of the most critical areas in scope rings
  
• a) Progressive machining for precise inner ring surface to achieve perfect interaction between ring and scope.
  
• b) Low-profile, flush-fit locking side plate, controlled by two spring-loaded guide rods that connect to the rail with a Torx screw to ensure secure, repeatable zero clamping.
  
• c) Integral square-shaped recoil stop that interfaces with a Picatinny slot through full surface contact to eliminate the possibility of forward and reverse movement due to recoil vibrations.
  
• 2-piece ring set, each equipped with 4 top Torx screws designed with a ring width of 22mm
  
• Designed to fit Mil-spec 1913 Picatinny Rail Platforms
  
• Machined from 6061-T6 aluminum alloy and 4605 steel with matte black hard coat anodizing
  
• UTG PRO® Original snag-free contoured profile with reduced weight and size
  
• EU PAT. EP2761064-0001,US PAT. D771218
  

NOTE: We recommend tightening the ring top screws with a torque of about 25 inch-pounds and the side plate screw with a torque of about 45 inch-pounds.